Multiport Valves

Multiport Valves

  • Replaceable Soft Seat - allows replacement of the soft seat insert without removing the valve from service. Provides bubble tight shut off in dirty service
  • Straight Thru Bore - 1/4" orifice straight thru bore give higher Cv than angle pattern. Straight thru pattern makes the valve inherently roddable.
  • Viton o-ring stem seal for high temperature-corrosive service
  • Dust Cover - Keeps dirt, rain, etc from entering the bonnet stem assembly
  • O-ring packing is below the threads to prevent process from reaching the threads and causing galling and corrosion
  • Back Seating of the Stem - Prevents the stem from accidentally being backout and seats metal to metal in the full open position
  • Stem is Nickel Plated - Prevent galling prevalent in similar metals
  • Mirror Bonnet Finish - Bonnet bore is polished to 16 RMS. This greatly extends to life of the Viton oring.
Part Number 316SS CS Configuration
MPV-GS8M8F276 X   1/2" Male X 1/2" Female
MPV-GS8F8F276 X   1/2" Female X 1/2" Female
MPV-GS12M12F276 X   3/4" Male X 3/4" Female
MPV-GS12F12F276 X   3/4" Female X 3/4" Female
MPV-GS8M8F276   X 1/2" Male X 1/2" Female
MPV-GS8F8F276   X 1/2" Female X 1/2" Female
MPV-GS12M12F276   X 3/4" Male X 3/4" Female
MPV-GS12F12F276   X 3/4" Female X 3/4" Female

Multiport Valve Diagram