Hand Valves

 

Hand Valves

Hand Valves

 

  • Replaceable Soft Seat - allows replacement of the soft seat insert without removing the valve from service. Provides bubble tight shut off in dirty service
  •  
  • Straight Thru Bore - 1/4" orifice straight thru bore give higher CV than angle pattern.
  •  
  • Straight thru pattern makes the valve inherently roddable.
  •  
  • Viton o-ring stem seal for high temperature-corrosive service
  •  
  • Dust Cover - Keeps dirt, rain, etc from entering the bonnet stem assembly and prevents lubricant washout
  •  
  • O-ring packing is below the threads to prevent process from reaching the threads and causing galling and corrosion
  •  
  • Back Seating of the Stem - Prevents the stem from accidentally being backout and seats metal to metal in the full open position
  •  
  • Stem is Nickel Plated - Prevent galling prevalent in similar metals
  •  
  • Mirror Bonnet Finish - Bonnet bore is polished to 16 RMS. This greatly extends to life of the Viton oring.

Ordering Information

Part Number 316SS CS Configuration
HV-GS4M4F276 X   1/4" Male X 1/4" Female
HV-GS4F4F276 X   1/4" Female X 1/4" Female
HV-GS8M8F276 X   1/2" Male X 1/2" Female
HV-GS8F8F276 X   1/2" Female X 1/2" Female
HV-GS12M12F276 X   3/4" Male X 3/4" Female
HV-GS12F12F276 X   3/4" Female X 3/4" Female
HV-CS4M4F276   X 1/4" Male X 1/4" Female
HV-GC4F4F276   X 1/4" Female X 1/4" Female
HV-GC8M8F276   X 1/2" Male X 1/2" Female
HV-GC8F8F276   X 1/2" Female X 1/2" Female
HV-GC12M12F276   X 3/4" Male X 3/4" Female
HV-GC12F12F276   X 3/4" Female X 3/4" Female

Male X Female

Hand Valve - Male X Female

Female X Female

Hand Valve - Female X Female